49
M1.1.SL300U-SL300UM.NLFREN 28082018
EN
5 Installation
WARNING!
Skilled and authorized personnel only should be allowed to perform these operations, follow all
instructions shown below carefully, in order to prevent possible damage to the car lift or risk of
injury to people.
Installation requirements (picture 15)
•
The car lift must be installed according to the specified safety distances from walls, pole -The specified safety distances
from walls must be 1000 mm at least, taking into consideration the necessary space to work easily. Because space for the
control site and for possible runways in case of emergency is also necessary.
• The room must be previously arranged for the power supply and pneumatic feed of the car lift.
• The room must be 4000 mm in height, at least.
•
The car lift can be placed on any floor, as long as it is perfectly level and sufficiently resistant (≥250 kg/cm², the thickness
of concrete ≥ 150 mm).
•
All parts of the machine must be uniformly lit with sufficient light to make sure that the adjustment and maintenance
operations can be performed safely, and without reflected light, glare that could give rise to eye fatigue.
• The integrality of arrived goods should be checked before the lift is installed.
• Moving and installing lift should follow the process as the picture instructs.
Picture 15
Note
: The foundation of the end of the lift platform P1, P2 is the structure of concrete. When the thickness of inside level
ground is less than 150 mm, the end of P1, P2 should be irrigated the acreage:
6000 × 2500 mm and thickness of concrete ≥ 150 mm
The basic thickness of concrete and levelling are keys, shouldn’t egregiously expect the ability of level adjustment of machine
self.
U
U
S
S
E
E
R
R
‟
‟
S
S
M
M
A
A
N
N
U
U
A
A
L
L
V
V
1
1
.
.
0
0
2
2
0
0
1
1
4
4
0
0
6
6
- 13 -
6. Installation
Skilled and authorized personnel only should be allowed to perform these operations, follow all
instructions shown below carefully, in order to prevent possible damage to the car lift or risk of
injury to people.
Installation requirements (Picture 15)
-The car lift must be installed according to the specified safety distances from walls, pole -The specified
safety distances from walls must be 1000 mm at least, taking into consideration the necessary space to
work easily. Because space for the control site and for possible runways in case of emergency is also
necessary.
-The room must be previously arranged for the power supply and pneumatic feed of the car lift.
-The room must be 4000 mm in height, at least.
-The car lift can be placed on any floor, as long as it is perfectly level and sufficiently resistant.
(≥250kg/cm²,the thickness of concrete≥150mm)
-All parts of the machine must be uniformly lit with sufficient light to make sure that the adjustment and
maintenance operations can be performed safely, and without reflected light, glare that could give rise to
eye fatigue.
-The integrality of arrived goods should be checked before the lift is installed.
-Moving and installing lift should follow the process as the picture instructs.
Note
: The foundation of the end of the lift platformP1, P2 is the structure of concrete. When the thickness
of inside level ground is less than 150mm, the end of P1, P2 should be irrigated the acreage:
60
00×2500mm and thickness of concrete≥150mm
The basic thickness of concrete and leveling are keys, shouldn‟t egregiously expect the ability of level
adjustment of machine-self.
Picture 15
copyrighted
document
- all
rights
reserved
by
FBC
