48
M1.1.SL300U-SL300UM.NLFREN 28082018
EN
U
U
S
S
E
E
R
R
‟
‟
S
S
M
M
A
A
N
N
U
U
A
A
L
L
V
V
1
1
.
.
0
0
2
2
0
0
1
1
4
4
0
0
8
8
- 12 -
Risk of falling (vehicle)
This hazard may arise in the case of incorrect positioning of the vehicle on the platforms, overweight of
the vehicle, or in the case of vehicles of dimensions that are not compatible with the capacity of the lift.
When the platform is being tested, the vehicle engine can not be turned on.
There is nothing should be placed on the lift-lowering area and the movable parts of the lift.
Risk of slipping
The floor caused by lubricant contamination of around the lift. The area beneath and immediately
surrounding the lift and also the platforms must be kept clean. Remove any oil spills
immediately.(
Picture 14
)
Picture 14
Risk of electric shock
Risk of electric shock in areas of insulated and shattered electric equipments
Do not use jets of water, steam solvents or paint next to the lift, and take special care to keep such
substances clear of the electrical control panel.
Risks related to appropriate lighting
The operator and the maintenance fitter must be able to assure that all the areas of the lift are properly
and uniformly illuminate compliance with the laws in force in the place of installation.
During up and down operations, the operator should continually observe the lift and can operate it only in
the position of operator. When lifting and lowering the vehicle, the cushion needs being put in the bottom
of chassis.
The handling of safety devices is strictly forbidden. Never exceed the maximum carrying capacity
of the lift, make sure the vehicles to be lifted have no load.
It is therefore essential to adhere scrupulously to all regulations regarding use, maintenance and
safety contained in this manual.
Picture 13
U
U
S
S
E
E
R
R
‟
‟
S
S
M
M
A
A
N
N
U
U
A
A
L
L
V
V
1
1
.
.
0
0
2
2
0
0
1
1
4
4
0
0
8
8
- 12 -
Risk of falling (vehicle)
This hazard may arise in the case of incorrect positioning of the vehicle on the platforms, overweight of
the vehicle, or in the case of vehicles of dimensions that are not compatible with the capacity of the lift.
When the platform is being tested, the vehicle engine can not be turned on.
There is nothing should be placed on the lift-lowering area and the movable parts of the lift.
Risk of slipping
The floor caused by lubricant contamination of around the lift. The area beneath and immediately
surrounding the lift and also the platforms must be kept clean. Remove any oil spills
immediately.(
Picture 14
)
Picture 14
Risk of electric shock
Risk of electric shock in areas of insulated and shattered electric equipments
Do not use jets of water, steam solvents or paint next to the lift, and take special care to keep such
substances clear of the electrical control panel.
Risks related to appropriate lighting
The operator and the maintenance fitter must be able to assure that all the areas of the lift are properly
and uniformly illuminate compliance with the laws in force in the place of installation.
During up and down operations, the operator should continually observe the lift and can operate it only in
the position of operator. When lifting and lowering the vehicle, the cushion needs being put in the bottom
of chassis.
The handling of safety devices is strictly forbidden. Never exceed the maximum carrying capacity
of the lift, make sure the vehicles to be lifted have no load.
It is therefore essential to adhere scrupulously to all regulations regarding use, maintenance and
safety contained in this manual.
Picture 13
Picture 14
Picture 13
Risk of falling (vehicle)
• This hazard may arise in the case of incorrect positioning of the vehicle on the platforms, overweight of the vehicle, or in
the case of vehicles of dimensions that are not compatible with the capacity of the lift.
• When the platform is being tested, the vehicle engine can not be turned on.
• There is nothing should be placed on the lift-lowering area and the movable parts of the lift.
Risk of slipping
•
The floor caused by lubricant contamination of around the lift. The area beneath and immediately surrounding the lift and
also the platforms must be kept clean. Remove any oil spills immediately (Picture 14).
Risk of electric shock
• Risk of electric shock in areas of insulated and shattered electric equipments
• Do not use jets of water, steam solvents or paint next to the lift, and take special care to keep such substances clear of the
electrical control panel.
Risks related to appropriate lighting
•
The operator and the maintenance fitter must be able to assure that all the areas of the lift are properly and uniformly
illuminate compliance with the laws in force in the place of installation.
• During up and down operations, the operator should continually observe the lift and can operate it only in the position of
operator. When lifting and lowering the vehicle, the cushion needs being put in the bottom of chassis.
WARNING!
The handling of safety devices is strictly forbidden. Never exceed the maximum carrying capacity
of the lift, make sure the vehicles to be lifted have no load.
It is therefore essential to adhere scrupulously to all regulations regarding use, maintenance and
safety contained in this manual.
copyrighted
document
- all
rights
reserved
by
FBC
