33
RVP165 - NLFREN - v1.0 - 10022015
EN
MACH
2.1 Tec
hnical specifications
Description
Measuring unit
Value3
Dimensions (h x w x depth)
mm
1385 x 790 x 690
Maximum working pressure
bar
10
Feeding air working pressure
bar
6 - 10
Recommended pressure when spray gun washer is working
bar
8
Diamter of 3 holes in suction nozzle (fig.1, 15)
mm
0.8
Air consumption (average) at 8 bar
Nm³/h
12.4
Fume chute diameter (fig.1, 16)
mm
150
Air speed at the hood entry ( 8 bar), zone A
m/sec
0.20
Air speed at the hood entry ( 8 bar), zone B
m/sec
0.51
Air flow from the chute ( 8 bar)
m³/h
366
Water tank capacity (fig.1, W2)
dm³ (litres)
50
Lower water container capacity (fig.1, W53)
dm³ (litres)
70
Capacity of each solvent container (fig.1, 27-28)
dm³ (litres)
25
Number of solvent containers
2
Acoustic pressure equivalent average level (LpAm)*
dB (A)
80.0
Acoustic pressure level at the operating post (LpA)*
dB (A)
89.2
Conventional Acoustic pressure level (LwA)*
dB (A)
95.2
*The sound level emitted by the spray gun washer has been measured under working conditions using a sound level meter with
integrator. Measures were taken by a skilled laboratory technician in accordance with EN ISO standard 3746: 1995.
2.2 Danger signs and warning signals
The spray gun washer carries a nameplate as well as pictograms (labels) that warn against residual risks present on the
machine.
The figure 3 indicates the danger signs and signals and shows where the nameplate is normally placed.
These warning signals have the following meanings:
1. Brand, CE Mark, Model, Serial number and Year of Manufacture, Maximum pressure, Danger Group, Class, Type in
compliance with the “ATEX” Directive Group, Amount of washing product.
2. Generic hazard.
3. Disconnect the compressed air supply before starting any maintenance or repair operations in the machine.
4.
The use of open flames and smoking near the trolley are prohibited.
5.
Ensure that the hoses are well fitted in the drum.
6. Read the instruction manual carefully before starting work with the Machine.
7. Put on a protective mask before working with the machine .
8. Put on solvent-proof rubber gloves before starting work.
9. Put on protective eyewear before starting work.
10. Correct procedure to manually wash the gun.
copyrighted
document
- all
rights
reserved
by
FBC