Initial Setup
Hard Drive (HDD) Installation
14
Remove 3 screws
•
IMPORTANT: Unplug the device from the power source and unplug all cables.
•
Remove 3 screws from the back Panel of the device
•
Slide the Tray out from the enclosure (black metal sleeve)
•
Install a SATA HDD using the SATA Cables available on the board
•
Flip the board and locate the 2 holes for securing HDD with screws.
•
Insert the Tray back in the enclosure and install the 3 screws on the back of the device.
•
Once the HDD is physically installed. Format the HDD using Mvix Ultio (in-built) utility
Caution: Do not install a HDD containing data/files. Ultio will format the HDD upon first use and erase all
current data.
ATTENTION
Observe Precaution when handling
Electrostatic Sensitive Devices
Summary of Contents for Ultio
Page 1: ...MvixUltio User Guide Solutions for the HD Planet ...
Page 2: ...Mvix Ultio User Guide 0 ...
Page 58: ...www mvixusa com ...