Initial
Setup
If choosing a
Component (YPbPr) Cable
:
Plug the Component YPbPr cable into the output of Mvix Ultio and input of TV. Since
Component cables are for video signal only, you will need to connect another AV (Red-
White) cable connector of AV cable into the audio output of Ultio and audio input of TV
or amplifier / AV receiver. Turn on your LCD or Plasma and select YPbPr video input
mode.
If choosing a
HDMI Cable
HDMI output provides the highest quality of video output. For your convenience, a HDMI
cable is included with Ultio. HDMI output offers the composite of digital audio and video
signal upto 1080p resoution. Connect the HDMI cable to output of Ultio and the display
device (TV, LCD, projector etc.) with HDMI input. Select HDMI mode in TV.
Always connect the HDMI cable before usage. Once connected, adjust your TV mode to
HDMI and requisite resolution (720p, 1080i or 1080p), depending on your viewing
preferences.
17
Summary of Contents for Ultio
Page 1: ...MvixUltio User Guide Solutions for the HD Planet ...
Page 2: ...Mvix Ultio User Guide 0 ...
Page 58: ...www mvixusa com ...