AMO R - AMO RR - AMO SV - AMO XT PINION - AMO RR PINION
1
1
manual for use and maintenance
EN - 31
3.2.d Tires pressure check
Due to an insufficient pressure of the tires:
- the tire could detach from the rim during
curves;
- the tire could easily get a puncture.
NOTE: the higher the body weight and load
are, the higher the tire pressure must be. The
reference pressure values are indicated in the
paragraph “Technical data”. Consider that the
shown values are purely indicative. In case of
doubts, please refer to the Manufacturer or
Authorized Retailer.
ATTENTION
Always respect the minimum and
maximum pressure indicated on
the tire.
- Unscrew the safety cap (1)
- check pressure using a manometer or with a
pump equipped with a manometer
- if necessary, inflate the tire or deflate it (by
pressing the internal valve)
- tighten the safety cap (1).
3.2.e Wheels check
- Check that the spokes (1) are tense and not
loose by tapping them with a screwdriver, if
loose spokes are detected it is necessary to
refer to an assistance centre
- lift the front wheel and make it turn with one
hand.
The rim and the tire must turn in a perfectly
circular manner. Eccentricity or twisting are
not allowed
- work in the same manner for control of the
rear wheel
- check that on the wheel groups there are no
foreign bodies (e.g.: wigs, fabric residues,
etc.), remove them if necessary
- check that the wheel groups have not been
damaged by foreign bodies
- if rim reflectors have been mounted, check
that they are fixed firmly; remove them if
loose.
Bici ELETTRICA_03-2022.indd 31
Bici ELETTRICA_03-2022.indd 31
15/06/2022 17:08:09
15/06/2022 17:08:09
