AMO R - AMO RR - AMO SV - AMO XT PINION - AMO RR PINION
2
1
2
1
manual for use and maintenance
EN - 36
4.1 ON/OFF BUTTON, BAT-
TERY STATUS, ASSIST-
ED PEDALLING COM-
MANDS
The button is not equipped with its own bat-
tery and uses the electric power coming from
the bicycle battery, make sure the battery is
charged.
The button is composed of the central com-
mand part (1) and of a ring (2) which changes
colour in function of the battery status and of
the level of assistance to pedalling.
4.1.a Switching on / Off of the bicycle
Switching on
Press the button (1) to switch on the bicycle
electric system, the ring (2) lights up indicat-
ing the battery status:
-
Ring colour “WHITE”
= Battery charge
higher than 75%
-
ring colour “GREEN”
= Battery charge
between 45% and 50%
-
ring colour “ORANGE”
= Battery charge
between 50% and 25%
-
ring colour “RED”
= Battery charge lower
than 25%
-
ring colour “RED FLASHING SLOWLY”
= Battery charge lower than 15%
-
ring colour “RED FLASHING QUICKLY”
= Battery charge lower than 10%
Switching off
With the system on, press the button (1) for
a few seconds and the system will switch off.
The led of the ring (2) switches off indicat
-
ing that the electric system of the bicycle is
switched off.
4.1.b Switching lights on/off (AMO XT)
- To switch the lights on when the E-Bike is
on, press the button (1) briefly and while
the LED (2) flashes, press the button (1)
again for longer.
- Repeat the same operation described
above to switch the lights off.
Bici ELETTRICA_03-2022.indd 36
Bici ELETTRICA_03-2022.indd 36
15/06/2022 17:08:14
15/06/2022 17:08:14
