AMO R - AMO RR - AMO SV - AMO XT PINION - AMO RR PINION
1
manual for use and maintenance
EN - 30
3.2 CHECK OF WHEELS
AND TIRES
3.2.a Wheels fixing check
- By working on one wheel first and then on the
other one, vigorously shake the wheel group
transversely with respect to the direction of
travel; the locking mechanism of the wheel
group must not move.
Squeaks or creaks must not be heard.
3.2.b Tires check
- Check for the absence of external damag-
es, foreign bodies and wear on the tires; the
whole surface of the tire must show its origi-
nal profile.
• the tire weave located under the rubber
layer must bot be visible
• cracks or dents must not be present
- remove possible foreign bodies (thorns, peb-
bles, glass fragments or similar) with your
hands or using a small screwdriver with care.
- check if air leaks after this operation.
In case of leakage of air it is necessary to re-
place the inner tube.
3.2.c Tires valve check
- Due to stresses and an insufficient pressure
of the tires, the tire and inner tube may move
on the rim, originating an oblique position of
the valves (1). In this case, the base of the
valve may tear up during travel, causing a
sudden loss of pressure of the tire
- if necessary:
• deflate the tire
• loosen the valve nut (if applicable) and
try to correct the position of the valve
• screw the valve nut (if applicable)
• inflate the tire.
Bici ELETTRICA_03-2022.indd 30
Bici ELETTRICA_03-2022.indd 30
15/06/2022 17:08:09
15/06/2022 17:08:09
