AMO R - AMO RR - AMO SV - AMO XT PINION - AMO RR PINION
5
2
4
3
2
4
5
manual for use and maintenance
EN - 44
- Lift or lower the protection cap (4) and con-
nect the charge connector (2) to the socket
(5) envisioned.
NOTE: insert the connector (2) in the sock-
et (5) making the two arrows located on the
socket and on the connector match, then turn
the ring in the direction of the arrow.
- Connect the power cord plug (3) to the pow-
er socket
- recharge begins
- the Red led lights up on the battery charger,
indicating that recharge phase has begun;
when the led turns green, the battery is
charged.
ATTENTION
Disconnect the plug (3) from the
power socket BEFORE discon-
necting the charge connector (2)
from the envisaged socket.
- Disconnect the plug (3) of the power cord
from the power socket
- disconnect the charge connector (2) from
the socket of the battery pack
- close the safety cap (4) of the battery pack
charge socket.
NOTE: at the end of each use, charge the bat-
tery pack completely. A battery entirely out of
charge may damage the battery pack.
NOTE: during recharge phase of the battery,
the led (5) flashes indicating the charge status
of the battery. At the end of recharge of the
battery, after disconnecting the battery charg-
er, the bicycle remains switched on.
Bici ELETTRICA_03-2022.indd 44
Bici ELETTRICA_03-2022.indd 44
15/06/2022 17:08:18
15/06/2022 17:08:18
