AMO R - AMO RR - AMO SV - AMO XT PINION - AMO RR PINION
1
1
2
3
4
manual for use and maintenance
EN - 49
6.5 DISASSEMBLY /
ASSEMBLY OF THE
FRONT WHEEL
NOTE: the operation must be carried out by
two persons, one who holds the bicycle and
one who removes the wheel. Alternatively,
hook the bicycle to a specific support.
Disassembly
- Unscrew the pin (1) and remove it from the
wheel
- extract the wheel (2) from the fork (3)
- insert the stop (4), supplied with the bicy-
cle, between the pads of the calliper.
ATTENTION
Do not pull the front brake lever
without the presence of the disc:
the pistons may come out from
their seat, causing oil to leak. If
you have available the stop to be
inserted between the front brake
pads, mount it on the brake cal-
liper.
Assembly
- If inserted, remove the stop (4) from the
brake calliper.
- Insert the wheel between the fork stems,
paying attention to correctly insert the
brake disc in the calliper.
- Insert the wheel pin (1) in the left stem
and in the wheel hub by slightly raising the
wheel, then screw the pin on the right stem
of the fork with a torque of 10Nm.
- Pull the front brake lever to set up the pads.
Bici ELETTRICA_03-2022.indd 49
Bici ELETTRICA_03-2022.indd 49
15/06/2022 17:08:20
15/06/2022 17:08:20
