Test printing
43
Note
Before connecting to a computer to print, configure the IP address, subnet mask and gateway.
Operation manual “Initial 5: IP Address”, “Initial 6: Subnet Mask”, “Initial 7: Gateway” P.95
Note
The figure below are examples of the Nozzle Check patterns (4-color setting).
The figure below is an example of the Nozzle Check B pattern (5-color setting). In this example, non-colored background area is shown in gray.
Note
The printer information (date and time of printing, printer’s serial number, firmware version) is printed on the nozzle check pattern.
Important!
If the printer perform the nozzle check printing immediately after the initial ink charge is complete, the following results may
occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow “Menu 5: Cleaning” on the Operation manual P. 90 and perform “Little Charge”. Then, check the nozzle check
pattern.
If there is no improvement in the print result even after performing “Little Charge”, leave the printer unused for an hour or more.
Then perform “Little Charge” again and check the print result.
If nozzle missing still persists, contact your local Mutoh dealer.
Y
Y
C
C
M
M
K
K
WH
WH
Y
C
M
K
WH
WH
Summary of Contents for ValueJet VJ-1627MH
Page 55: ...Safety Instructions 55 ...
Page 56: ...VJ1627MHE Q 00 ...
