Muton ValueJet VJ-1627MH Startup Manual Download Page 28 | Manualshive

Page: 28 / 56

background image

28

Setup

[9]

Insert High capacity ink pack adapters into all the cartridge slots.

• Insert each High capacity ink pack adapter to firmly seat it into each

slot.

The printer starts charging cleaning fluid.

When cleaning fluid charging ends, the message on the left will
appear.

[10]

Remove all High capacity ink pack adapters from the ink cartridge

slots.

The printer starts discharging cleaning fluid.

[11]

If the message on the left appears, prepare a PET bottle or other
container to drain waste fluid from the printer.

• Press the [Enter] key.

Busy-Washing

Remove Cartridges

Busy-Washing

Empty WasteInk

- > E

«
...
26
27
28
29
30
...
»

Summary of Contents for ValueJet VJ-1627MH

























































Reviews:

No comments

Related manuals for ValueJet VJ-1627MH

7300DX - Phaser Color Laser Printer

Brand: Xerox Pages: 14

Brand: Konica Minolta Pages: 266

Brand: Xerox Pages: 13

V16 Automatic Shaker Unit

Brand: Garment Printer Ink Pages: 21

Brand: Aficio Pages: 156

Brand: iDPRT Pages: 74

Brand: Memjet Pages: 181

Brand: Intuitive Pages: 18

5470 - X Color Inkjet

Brand: Lexmark Pages: 202

Jetrix LXi Series

Brand: InkTec Pages: 3

Brand: MAXPhotonics Pages: 24

Brand: Canon Pages: 236

Brand: Canon Pages: 1366

Brand: Canon Pages: 1356

Brand: Canon Pages: 913

Brand: Canon Pages: 531

Brand: Tally Pages: 54

image Prograf iPF785 Series

Brand: Canon Pages: 326

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands