40
Test printing
2.
After loading the media...
[1]
“Lever Up” is displayed on the Operation panel.
[2]
Lower the media loading lever.
Note
Media-feed table is excluded from the illustration for simplicity.
[3]
Make sure that the edges of the media is appropriately pressed by Pressurizing rollers.
More than 50% area of the pressurizing roller on the far left and right should hold down the edge of the media.
If not, adjust position of the rail on the media-feed table.
[4]
Close the front cover.
Note
Media-feed table is excluded from the illustration for simplicity.
[5]
“Media: Type ** OK?” is displayed on the Operation panel.
• Press the [+] key or [-] key on Operation panel to select the User
Type Setting.
•
Check that the media type in the selected user type is set to “Rigid”.
Lever Up
Good
Good
Not Good
Rigid media
Pressurizing roller
Media :
Type **
OK?
Summary of Contents for ValueJet VJ-1627MH
Page 55: ...Safety Instructions 55 ...
Page 56: ...VJ1627MHE Q 00 ...
