Falcon II RJ-8000 Operation Instructions
45
AP-75080, Rev. 1.1, 04/12/02
1 = Foot switch
Step 5 :
Open the front cover.
1 = Front cover
Step 6 :
Load the sheet media into the insertion slot in the front of the printer.
1 = Sheet media
2 = Insertion slot
Step 7 :
Set the right edge of the media so that it is parallel with the media setting position.
Notes :
The media set position is a guide for setting up the media.
If the right edge of the sheet media is 5 mm or more from the media setting
position, a media set error may result if the media has not been detected. Make
sure to set the right edge of the sheet media within 5 mm of the media setting
position.
Downloaded From ManualsPrinter.com Manuals
