Falcon II RJ-8000 Operation Instructions
17
AP-75080, Rev. 1.1, 04/12/02
2.2. UNPACKING YOUR RJ-8000 PRINTER.
Caution :
•
When unpacking this product, always work with at least four people.
•
When removing this product from the packaging box, always remove the vinyl
plastic while holding the side of the product. Holding the unit with the vinyl plastic
wrapping can result in slippage and dropping the unit, resulting in damage.
2.2.1. Unpacking the packaging box of the main unit.
Unpack the package of the main unit according to the following procedure.
Step 1 :
Move the packaging of the main unit to the location to unpack.
Step 2 :
Remove the restraining bands.
Step 3 :
Remove the top board and take out the packaging material (right upper side and left upper side)
and the scroller.
1 = Top board
3 = Packaging material (left upper side)
2 = Packaging material (right upper side)
4 = Scroller
Step 4 :
Remove the outer boards and take out the accessory box. Take out the packaging box of the
waste fluid tank.
1 = Outer Board
3 = Packaging box of the waste fluid tank
2 = Accessory box
Downloaded From ManualsPrinter.com Manuals
