Falcon II RJ-8000 Operation Instructions
28
AP-75080, Rev. 1.1, 04/12/02
2.5.5. Removal of protective packaging material.
Protective packaging material is attached on following locations of this product.
Remove all protective packaging materials according to the following procedure.
Step 1 :
Remove tape from all parts of the product.
Step 2 :
Remove the two anti-rubbing materials on
the top of the main unit.
1 = anti-rubbing material
Step 3 :
Remove the head unit fixture material from
inside the front cover according to the
following procedure.
1 = Front cover
1 = Wing bolt
2 = Head unit fixture material
Open the front cover.
Notes :
Be careful not to pinch your
fingers when opening and
closing the front cover.
Remove the two wing bolts.
Remove the head unit fixture material.
Close the front cover.
1 = Front cover
Step 4 :
Removal of protective packaging material is completed.
Downloaded From ManualsPrinter.com Manuals
