Falcon II RJ-8000 Operation Instructions
46
AP-75080, Rev. 1.1, 04/12/02
Step 8 :
Press [F2] key on the control panel to lower the pressurizing roller.
•
The MEDIA Set lamp will turn OFF.
Step 9 :
Close the front cover.
1 = Front cover
Step 10 :
The media initial menu is displayed on the control panel.
3.7.4. Setting media type.
The procedure for setting media type is explained below.
To set the media type, follow the steps below.
Step 1 :
Turn the printer on and load the media.
•
Once the media has been loaded, the media initial menu will be displayed.
Step 2 :
Press one of the following keys on the control panel, and select the current media type.
•
When alternating the roll/sheet media selection: [F2]
•
When changing from media loading: [F3]
•
When changing media type: [F4]
Setup item
Key
name
Parameters
Descriptions
Roll media
Media Type
F2
Sheet media
Alternates the roll media type.
→
roll media : set when loading roll media.
→
sheet media : set when loading the sheet media
Lever up
Lever Up/ Down
F3
Lever down
Switches between up and down motion of the pressure
rollers.
Use this when starting over from the media setup.
Downloaded From ManualsPrinter.com Manuals
