88 Set 23: Header Dump
Note
• The data will be useful when contacting technical support.
• Performing printing if the printer is connected to PC, the print settings of RIP soft you are using are printed on data header.
Note
• This printer has 2 Print heads inside Print head unit.
• Even if "Head 1" or "Head 2" is set, when performing the Test print menu, the both Print heads are used for printing.
• When "Head 1" or "Head 2" is set, if "A-S. Fine&Wave" or "B-S.Fine&Wave" is selected, the selected Print head is further divided for printing.
Set 23: Header Dump
Sets whether to print the following information when printing.
• Data header
• Data dot number (printed only when Header damp setting is ON)
• Printer serial number
• Firmware version
Setting values
Dump data is not printed.
This is the initially set value.
Dump data is printed after the original image is
printed.
Prints only damp data.
“Data dot number” is not printed.
Set 24: Single Head
You can set whether or not to perform printing using only one Print head.
Setting values
Both Print heads are used for printing.
This is the initially set value.
Only left Print head is used for printing.
Only right Print head is used for printing.
Set 23:
Header Dump
Header Dump :
OFF
Header Dump :
ON
Header Dump :
DUMP
Set 24:
Single Head
Single Head :
OFF
Single Head :
Head 1
Single Head :
Head 2
