140 Error message display and remedies
This section describes error messages and remedies.
Error messages are displayed when certain failures occur during printer operation.
If an error that can be displayed occurs, the printer may display the following error messages on the operation panel
and stop operation.
Error message display and remedies
Display
Description
Cover Open
Front cover is open.
Close Front cover.
Mainte. CoverL Open
Left Maintenance cover is open.
Close Maintenance cover.
Mainte. CoverR Open
Right Maintenance cover is open.
Close Maintenance cover.
Lower the lever
Media loading lever is raised.
Lower Media loading lever.
Lever Up
The media is not loaded.
Load the media.
Undefined Media
Media detection has failed. (Stops operation)
Reload the media.
Media Slant
Media is fed obliquely. (Stops operation)
Reload the media.
End Of Media
The Media has run out. (Stops operation)
Load a new media.
Media End / Takeup Err
The Take-up system switch is off. (Stops operation)
Set the Take-up system switch to outside roll or inside roll.
Open Gutter Cover
Ink gutter cover is open.
Close Ink gutter cover.
Heater Error
Your heater may be malfunctioning. (Stops operation)
Check the heater.
[******] Ink End
Ink has run out. (Stops operation)
Replace with a new ink cartridge.
[******] NoCartridge
Ink cartridge is not inserted. (Stops operation)
Insert Ink cartridge.
[*******] Discharged
Ink is not filled.
Perform initial ink filling.
Performing initial charging after head cleaning
Full WasteInkTank
The waste fluid tank has become full.
(Operation will stop when this happens.)
Immediately transfer the waste ink into a container.
[*] Ink Low
Slot * ink is low.
Get a replacement cartridge ready.