MUTOH VJ-1638WX, Operation Manual

Page: 361 / 380

VJ-2638X/1938X/1638X/1938WX/1638WX OPERATION MANUAL Troubleshooting
Error messages 361
NOTE
[********] and [*]of the error display indicates the slot number that is subject to warning.
26 Measurement Error
(Cover Open) Cover(s) opened while
measuring the color target.
(VJ-2638X/1938X/1638X) Close Front cover and
Maintenance covers on both
sides of the printer.
3.4 Loading
media
6.2.4 Cleaning
Cleaning wiper
27 Measurement Error
(Lever Lifted) Media loading lever is raised
while printing or measuring
the color target.
(VJ-2638X/1938X/1638X) Printing or measuring is
cancelled. Start printing and
measuring the color target
again.
4.5 Using
Spectrophotomet
er (VJ-2638X/
1938X/1638X)
28 Measurement Error
(Communication) A communication error
occurred while printing or
measuring the color target.
(VJ-2638X/1938X/1638X) Check the communication
requirements between the
printer and your PC.
3.7
Connecting the
printer to PC
29 Measurement Error
(Instrument) A communication error with
Spectrophotometer
(SPECTROVUE VM-10)
occurred while measuring the
color target.
(VJ-2638X/1938X/1638X) Check the connection
between the printer and
Spectrophotometer
(SPECTROVUE VM-10).
4.5 Using
Spectrophotomet
er (VJ-2638X/
1938X/1638X)
30 Measurement Error
(Cancelled) Printing or measuring the
color target has been
cancelled from Operation
panel or the RIP software.
(VJ-2638X/1938X/1638X) Start printing and measuring
the color target again.
4.5 Using
Spectrophotomet
er (VJ-2638X/
1938X/1638X)
31 Measurement Error
(White Calibration) White calibration has failed.
(VJ-2638X/1938X/1638X) • Open Maintenance cover
on the left side of the
printer and install White
reference plate correctly.
• When White reference
plate is contaminated,
apply a damp and tightly
squeezed soft cloth to clean
it.
• Start printing and
measuring the color target
again.
• If you still have trouble,
contact your local MUTOH
dealer.
4.5 Using
Spectrophotomet
er (VJ-2638X/
1938X/1638X)
32 Measurement Error
(Illegal Operation) Colorimeter has been
installed forcibly without
following the measurement
procedure.
(VJ-2638X/1938X/1638X) Remove Colorimeter.
4.5 Using
Spectrophotomet
er (VJ-2638X/
1938X/1638X)
33 Measurement Error
(Head height) Head height is set to High
(VJ-2638X/1938X/1638X). Set the head height to Low or
Mid.
4.2.5 Head
height adjustment
No. Display Description Remedy Reference