MUTOH VJ-1638WX, Operation Manual

Page: 133 / 380

VJ-2638X/1938X/1638X/1938WX/1638WX OPERATION MANUAL Before using
Test print 133
3.5.6.2 Custom head alignment
Perform adjustment for A to F patterns.
All print modes will be adjusted.
This menu consists of the following menus.
Adjustment method
1. Perform “Fine Ptn. ALL” to check all patterns, and perform adjustment if it is misaligned.
2. Perform “Fine PatternX” for the pattern that was adjusted in step 1 to check if it is adjusted, and
perform adjustment if it is misaligned.
NOTE
When you have adjusted most of the patterns in step 1, perform “Adjust ALL” in step 2 as well to
check and perform adjustment.
Follow the procedure below to perform adjustment.
1. Turn ON the printer and load the roll media.
3.4.2 Loading Roll Media into the printer
2. Display the Adjust adjustment menu on Operation panel.
a. Press the [Menu] key on Operation panel.
• “Menu 1: Setup>” is displayed on the operation panel.
Adjustment Description Reference
Fine Ptn. ALL Print out the confirmation patterns A to F, and then adjust all
patterns. -
Fine PatternX Select one of the confirmation patterns A to F and adjust it. -