2.3 Troubleshooting Without Error Messages
VJ628XE-M-00
2.3.3 Printing Problems
49
14
The printed results are
uneven. (Vertical direction
against the printer unit)
1. Is the printer used in an environment within the range of
operating conditions?
Use the printer under the operating conditions.
2. In printing, does Steel Bare bounce?
Reassemble Steel Bare.
3. Is T fence dirty?
• Clean T fence.
• If T fence is still dirty after cleaning or
damaged, replace it.
4.
The
internal processing of
MAIN board may be
faulty.
Initialize parameters, re-input or readjust it, and
then check the operation again.
-
5. Does Suction FAN correctly operate in “Test: Fan” in the
self-diagnosis function?
• Check the connection of the connector of
the Suction FAN.
• Replace Suction FAN cable.
• Replace Suction FAN.
6. Is the tension of CR Belt adjusted to the specified value? Adjust CR Belt tension.
7. If roll media is used, does Scroller rotate smoothly?
• Adjust the mounting position of Roll media
holder.
• Replace Roll media holder.
-
8. Does Pressure roller rotate smoothly while Pressure
Handle is raised?
If paper dust or pieces of paper is adhered
around Pressure roller, wipe it off with a soft
damp cloth.
Operation Manual
9. CR Motor may be malfunctioned.
Replace CR Motor.
Table 2-8 Symptoms, Check Items and Actions for Printing Problems(Continued)
No.
Symptom
Check item
Action
Reference