manualshive.com logo in svg

MUTOH Valuevet VJ-628X, Maintenance Manual, Page: 126 / 423

Share
Download
MUTOH Valuevet VJ-628X Maintenance Manual Download Page 126

3.8.10 Replacing Cutter Solenoid Assy

126

3.8 Replacing Cursor section

VJ628XE-M-00

9 

Push the tab of Lock Kicker with a driver, etc. 
to remove Cutter Solenoid Assy.

A : Cutter Solenoid Assy
B : the tab of Cutter Holder
C : Driver .etc

10 

Remove Cutter Solenoid Cable from Cutter 

Solenoid.

A : Connecting point

NOTE

Cutter solenoid and Cutter Solenoid 
Cable are connected in the post header 
assembly. Do not lose the post header 
assembly.

C

B

A

A

11 

Replace Cutter Solenoid Assy.

NOTE

When installing the cutter solenoid, note 
the following.
•  Joint the cutter cap and the CR lock 

kicker, push down the cutter cap and 
the CR lock kicker together to install 
them onto the cutter holder.

• Make sure to join the cutter cap and the 

CR lock kicker.Otherwise, when 
turning the power ON, the carriage 
cannot move from the origin point to 
the left.

Summary of Contents for Valuevet VJ-628X








































































































































































































































































































































































































































Reviews:

No comments