manualshive.com logo in svg

MUTOH Valuevet VJ-628X, Maintenance Manual, Page: 191 / 423

Share
Download
MUTOH Valuevet VJ-628X Maintenance Manual Download Page 191

4.3.3 Required Environment

191

4.3 Working with MUTOH Service Assistance Software

VJ628XE-M-00

(10)IP address setting

This section describes the procedure to set up IP address for MSA.
When indicated IP address is different from printer IP address, change IP address to match 
the printer IP address.

NOTE

The IP address default value for printer and MSA is set to “192.168.1.253“. When the 
default value is used, the following setting in not needed.

Follow the steps below to set the IP address.

1 

Select [Setup (S)] - [Option (O)] on the 
main window.

2 

Input the IP address in the field with red 
mark. IP address is the same with 
computer’s.

When IP address is changed, [Automatic 
model selection confirmation] window 
appears.

㨀㧵㧼

Double click “IP Address”, it is set to default value”192.268.1.253”.

3 

Click [Yes] to use Automatic selection.

Model name shall be changed to the 
name of the connected printer model.

*This window appears only when IP 
address is changed.

Summary of Contents for Valuevet VJ-628X








































































































































































































































































































































































































































Reviews:

No comments