manualshive.com logo in svg

MUTOH Valuevet VJ-628X, Maintenance Manual, Page: 234 / 423

Share
Download
MUTOH Valuevet VJ-628X Maintenance Manual Download Page 234

4.7.1 Head Alignment (Horizontal Slant)

234

4.7 Head Adjustment

VJ628XE-M-00

5 

Loosen the screws (4 pieces) retaining Head 
base.

A : Pan-head screw with spring washer and 

flat washer M3

ｘ

6

B : Head base
C : Head mounting plate

6 

Shift Notch to adjust the head.

NOTE

• 1 notch is counted as it clicks. The print position moves upward/downward by 

half a dot per 1 notch.

A nozzle (Black) lines will be 
shifted upward.

A nozzle (Black) lines will be 
shifted downward.

7 

Tighten the loosened screws (4 pieces) in step 
6.

 A 

 B 

 C 

 A 

8 

Print check pattern again to check head slant 
(horizontal height) is appropriate.

step 5

9 

When head slant is not correct, repeat step 5 
to step 9.

10 

To reassemble unit, reverse the removal 

procedure.

Summary of Contents for Valuevet VJ-628X








































































































































































































































































































































































































































Reviews:

No comments