manualshive.com logo in svg

MUTOH Valuevet VJ-628X, Maintenance Manual, Page: 127 / 423

Share
Download
MUTOH Valuevet VJ-628X Maintenance Manual Download Page 127

3.8.11 Replacing Cutter Solenoid Cable

127

3.8 Replacing Cursor section

VJ628XE-M-00

3.8.11 Replacing Cutter Solenoid Cable

　 ●

 Tools & Jigs & Maintenance part

㨀㧵㧼

This section describes the procedure to replace the maintenance part, Cutter SOL 
Cable Assy.
n this section, it is reffered to as Cutter Solenoid Cable.

Name

No.

Remarks

Cutter SOL Cable Assy

DG-43318 Exploded View Cursor

Phillips screwdriver No.2

Generic 
products

-

1 

Removing R Side Cover.

 3.2.2 Removing Side Cover

2 

Remove CR Board Cover.

 3.8.3 Removing CR Board Cover

3 

Remove Cutter Solenoid Cable from CR 
Board.

4 

Remove Cutter Solenoid Cable from the 
clamps on the path.

J15 

5 

Remove Cutter Solenoid Cable from Cutter 
Solenoid.

A : Connecting point

NOTE

Cutter solenoid and Cutter Solenoid 
Cable are connected in the post header 
assembly. Do not lose the post header 
assembly.

6 

Replace Cutter Solenoid Cable.

7 

To reassemble unit, reverse the removal 
procedure.

A

Summary of Contents for Valuevet VJ-628X








































































































































































































































































































































































































































Reviews:

No comments