Roll systems – Maintenance Manual
56
AP-74100, Rev. 2.0, 12/01/05
4.3.2 Calibration of the front and rear roll unit.
Caution :
•
In case you have replaced the front and/or rear media guide, always perform a
calibration of the front tensioning system and the roll-up systems. Because the new
media guide can have a slight different shape, thickness…
Step 1 :
Install a core between the roll unit and the motorized roll unit.
Step 2 :
Standing at the front of the unit, use some tape to create a loop with the synthetic paper.
Step 3 :
Put the loop around the core installed on to the winder.
Step 4 :
Put the pressure rollers in the up position.
Step 5 :
Slide the strip forwards.
Step 6 :
Standing at the front side of the unit, place the adjustment plate onto the large strip and slide it
against the pressure rollers.
Summary of Contents for Unwinder
