Roll systems – Maintenance Manual
46
AP-74100, Rev. 2.0, 12/01/05
4.1.5. Angle mark front tensioning system
4.1.6. Stop Sensor Position
A = Front Stop Sensor
B = Rear Stop Sensor
Notes :
•
The Front Stop Sensor should be covered if the front tension bar has an angle of
12° or less.
•
The Rear Stop Sensor should be covered if the rear tension bar is horizontal or
lower.
Summary of Contents for Unwinder
