Roll systems – Maintenance Manual
54
AP-74100, Rev. 2.0, 12/01/05
Step 4 :
Pull the strip so there is an equal tension.
Step 5 :
Standing at the front side of the unit, place the adjustment plate onto the large strip and slide it
against the pressure rollers.
Step 6 :
Manually draw a line.
Step 7 :
Slide the strip to the left side of the unit. Pull the strip so there is an equal tension.
Step 8 :
Manually draw a line. Check if both lines are overlapping.
Step 9 :
If not, you have to perform the following adjustment procedure.
Summary of Contents for Unwinder
