Murska 1400S2X2, Operating Manual, Page: 4 / 56

3
EC DECLARATION OF CONFORMITY FOR MACHINERY
The CE Mark is on the Machine Identification Label
EC Declaration of Conformity for
Machinery
(Directive 89/392/EEC, Annex II, sub. A; en)
Manufacturer:
Aimo Kortteen Konepaja Oy
Pohjolantie 2
FI-84100 Ylivieska
Finland
Herewith declares that
Murska 1400 / 2000 S2x2
is in conformity with the provisions of the Machine Directive
(Directive 89/392/EEC), as amended, and with national
implementing legislation.
Aimo Korte
Managing Director
WARRANTY
Warranty
Aimo Kortteen Konepaja Oy warrants its products to be in conformance to written specifications and to be
free from defects in workmanship.
The warranty shall not apply to failure or deficiency which has been caused by misuse, neglect, improper
assembly, or unauthorised repair or modification.
Rapid wearing may occur in the rollers if not correctly adjusted.
Please pay particular attention to adjusting them correctly.
Other conditions according to
ORGALIME S 92
Thanks to continuous product development the manufacturer can introduce improvements to the machine.
This does not mean that a machine produced prior to the date of introduction of such improvement, would be
modified by the manufacturer free of charge.