Murska 1400S2X2, Operating Manual, Page: 20 / 56

19
STARTING UP
1. Ensure that the Check-list has been carried out.
2. Ensure that the Roller Adjustment has been carried out.
3. Ensure that the Machine is horizontal plane.
4. Ensure the Additive Applicator is calibrated and ready. Close Feeder
Hatches.
5. Fill up the Hopper.
6. Ensure that the distance between the rollers are at least 0,3 mm.
7. Apply maximum tension to the Roller Tensioner Springs by pumping
the Hydraulic Hand Pump until the overload valve is operating (K1400
S2X2 about 120 bar, K2000 S2X2 about 140 bar) , first one side, then
close the valve in hydraulic pipe and tension the other side spring.
8. Check all Guards are fitted and secured.
9. Engage tractor PTO at 540 rpm.
10. Open Feeder Hatch to provide a uniform flow of grain on the rollers,
open first one side, then the other side. As flow increases, tractor revs
may require adjustment.
11. Check that the flow of grain is just sufficient to be pressed without a
build up of grain on the rollers.
12. If dough balls are produced and the grain is mushy, increase the space
between the rollers by turning the Adjusting Crank clockwise.
The towing bar must be adjusted
individually for various tractors to keep the
machine in horizontal position.