Murska 1400S2X2, Operating Manual, Page: 14 / 56

13
3. Check the Feeder Belt tension. Adjust or replace if required.
4. Check Auger / Elevator Belt tension. Adjust or replace if required.
5. Check Force Feeder. Clean and straighten if necessary.
6. Check and clean the protective magnets.
7. Observe the functioning of the hydraulic components.
8. Apply grease to grease nipples.
9. Check and calibrate the liquid applicator for additive output to
correspond with the average output of the crimper. The proper dosing
is dependent on the preservative used, grain humidity etc.