Murska 1400S2X2, Operating Manual, Page: 26 / 56

25
END-OF-SEASON MAINTENANCE
Switch off all power to the machine before any service.
1. Clean the crimper thoroughly with a power hose. Do not aim the jet of water straight
on the bearings.
2. Clean and oil the elevator chain, replace worn-out paddles.
3. Apply anti-corrosion protective material on all surfaces to minimise corrosion.
4. If the paintwork is damaged, apply anti-corrosive paint.
5. Check roller surfaces.
6. When not connected to a tractor, the PTO shaft should be supported so that it does
not get damaged or foul the protecting guard.
7. The crimper should be kept in a dry place when not in use.
8. For longer bearing life, turn the rollers by hand half a turn once or twice during the
winter.
9. If any bearings are dismantled, they should be washed and greased thoroughly before
being reinstalled.