Murray 621401x61NB, Instruction Book

Page: 7 / 200

GB
7
1740260
CONTENTS
HAZARD SYMBOLS AND THE MEANINGS 8 . . . . . . . . . . .
OPERATING SYMBOLS AND THEIR MEANINGS 8 . . . . .
RULES FOR SAFE OPERATION 9 . . . . . . . . . . . . . . . . . . . .
ASSEMBLY 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPERATION 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE CHART 13 . . . . . . . . . . . . . . . . . . . . . . . . . . .
TROUBLE SHOOTING CHART 15 . . . . . . . . . . . . . . . . . . . . .
LIMITED WARRANTY 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Information
This instruction book is written for a person with some mechanical ability.
Like most service books, not all the steps are described. Steps on how to
loosen or tighten fasteners are steps anyone can follow with some
mechanical ability. Read and follow these instructions before you use the
unit.
Know your product: If you understand the unit and how the unit
operates, you will get the best performance. As you read this manual,
compare the illustrations to the unit. Learn the location and the function of
the controls. To help prevent an accident, follow the operating instructions
and the safety rules. Keep this manual for future reference.
IMPORTANT: Many units are not assembled and are sold in cartons. It is
the responsibility of the owner to make sure the assembly instructions in
this manual are exactly followed. Other units are purchased in an
assembled condition. On assembled units, it is the responsibility of the
owner to make sure the unit is correctly assembled. The owner must
carefully check the unit according to the instructions in this manual before
it is first used.
Controls & Equipment Features (see Figure 1)
Crank Assembly (2) − Changes the direction of the discharge chute.
Chute Deflector (3) − Changes the distance the snow is thrown.
Discharge Chute (4) − Changes the direction the snow is thrown.
Auger Drive Lever (5) − Starts and stops the auger (snow gathering and
throwing) which also propels the snowthrower..
Engine Features
Stop Switch (8) − If equipped, move to the ON position to start the
engine.
Primer Button (9) − Injects fuel directly into the carburetor for fast starts
in cold weather.
Recoil Starter Handle (12) − Use to manually start the engine.
Choke Control (14) − Use to start a cold engine.
MODEL NO.: 621401x61NB
SERIAL NO.:
3500 min-1
30 kg
SKU No.:
Assembled in Suzhou, China 215218
by Limac for Briggs & Stratton Corporation
YYYY MM DD:
www.briggsandstratton.com
Declared vibration emission values in accordance with Directive 98/37/EC.
Vibration Emission according to EN 1033;1996: 7,1 m/s
2
.
Values determined at the handle when the machine was operated stationary on a
concrete surface at 3500 min
− 1.
Declared airborne noise emissions of Lw
A
104 dB is in accordance with Directive
2000/14/EC, Annex V.
Sound Pressure Level at operator position 84 dB.
Values determined at ear according to the specifications of EN ISO 11201.
Declared airborne sound
power level of 104 dB(A) is in
accordance with Directive
2000/14/EC.