Multiva Cerex 300 Comfort, Operation And Maintenance Manual

Page: 130 / 187

7.1.14. Checking the functioning of the adjusting of fertiliser target
rate
Figure. 7.1.14. - 167. Checking the functioning of the adjusting of fertiliser target rate. On the left, a machine
without a gearbox or a machine equipped with a gearbox (basic model). On the right, a machine with a dual
gearbox.
1. Enable adjusting of fertiliser target rate and ensure that the dial (2, 4) moves on the
fertiliser feeding quantity scale (1, 3).
On the basic model, the adjustment only moves when the seed axles rotate. On
the machine with dual gearbox, the adjustment moves even when the seed axles
do not rotate.
7.2. Lubrication
After the commissioning of the machine, all lubrication points should be lubricated
after the rst 10 hectares.
The disc coulters are equipped with self-lubricating bearings, which do not need to be
lubricated.
When lubricating, make sure that the grease nipple is open. Lubricate the point until
grease ows out of the joint. Usually, 1-2 squeezes of a grease gun is enough for the
grease nipples. Wipe off excess grease.
Use lithium-based lubricating grease for lubrication. The chains are lubricated with
high-quality motor oil.
The use of viscous, long- bre grease and grease containing solid lubricant particles
(molybdenum sulphide and graphite) is prohibited.
Operation and maintenance manual
Cerex 300 and Cerex 400 Comfort
1.00
130 (187)