Multitek MULTIGEN M820-GM Series, Operating Manual

Page: 88 / 90

APPENDIX A
Preprogrammed pressure senders.
If M820-GM1, GM4, GM9 units are ordered with relay
outputs, but without setpoints being specified the factory
will set them as shown in the table below :-
Note see sections 4.5 for programming.
PRESSURE :
Code Manuf./ Type No Range Set Point
No.
01 N/A Linear 0 to 255 Ohms N/A
0 to 255 PSI N/A
02 Murhpy EPS100 0-100 PSI 80 PSI
03 VDO 360-004 0-150 PS1 N/A
VDO 360-005 0-10 Bar N/A
04 Datcon 02505-00 0-100 PSI N/A
05 Fozmula S10297 0-10 Bar N/A
Fozmula S10297 0-150 PSI N/A
06 Murphy Orlan R13 0-100 PSI N/A
07 Stuart Warner 411K 0-100 PSI N/A
08 Fozmula 95237 0-150 PSI N/A
0-10 Bar N/A
88
GENMOM.PM5 05/03/101, 10:17 88