3. DISPLAY SCREENS
3.1 The MultiGen can be programmed for either single
phase load, a 3 phase 3 wire unbalanced load or a 3 phase
4 wire unbalanced load.
The sequence of the parameters displayed is dependent on
the system that has been programmed into the MultiGen.
3.1.1 When the MultiGen is powered up the following
screens are shown if it has been programmed for 3 phase 4
wire unbalanced (M820-GM9) :-
V
276.9
277.0
V
V
480.0
V
479.9
480.1
V
V
L
1
L
3
ACTION :
Press
ACTION :
Switch on power
COMMENTS :
The MultiGen is pro-
grammed to 3 phase 4 wire
unbalanced load. The first
screen shows 3 phase line to
neutral voltage.
6
L
2
L
1
L
3
L
2
L
1
N
L
2
N
L
3
N
COMMENTS :
The second screen shows 3
phase line to line voltage
L1/L2, L2/L3, L3/L1. If the
button is pressed the
MultiGen goes back to the
previous screen.
277.O
MultiGen GENERATOR MONITORING SYSTEM
MultiGen GENERATOR MONITORING SYSTEM
MultiGen GENERATOR MONITORING SYSTEM
MultiGen GENERATOR MONITORING SYSTEM
GENMOM.PM5
20/03/100, 10:32
6
