Chapter 3 – Using the Web Management Software
27
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Server Port:
Enter the Server Port Number. Default port is 1020.
Broadcast Timer:
Enter the amount of time in seconds for the auto-discovery packet granularity of
periodic broadcasting. Default is 10 seconds.
Auto Reboot Timer Configuration
Auto Reboot Timer:
Enter the number of hours to lapse between each automatic reboot. The default of zero
deactivates the timer. Range is 0 to 999.
Telnet Configuration
Enables/Disables the Telnet port. The default is
Enable
. This is specifically for telnet port 23 for technical support
debug. You can still access the integrated cellular modem using port 5000 when this is disabled. Ensure that PPP is
also disabled before telnetting to the port.
IP Setup > HTTP Configuration
HTTP Configuration
HTTP Port:
Enter the port number on which the HTTP server will listen for requests. Default is 80.
HTTP Time-out:
Set the HTTP session in seconds. The default is 120 seconds.
Authentication
Username:
Enter the Username that can access to the Web Management software. Default is
admin
. This username and password are also used for telnet access to the router and
integrated cellular modem.
Password:
Enter the Password for access to the Web Management software. Default is
admin
.
Notes:
User name and password are case-sensitive.
Change the password to one that is more secure.
Passwords can be up to 100 characters.
Summary of Contents for MultiModem rCell MTCBA-H3-EN3-P1
Page 1: ...MultiModem rCell Intelligent Wireless Router User Guide ...
Page 14: ......
