Multi-Tech Systems, Inc. MultiModem rCell User Guide
22
Chapter 3 - Web Management Software
Use the Web Management software to configures your router’s Ethernet functions.
Navigating the Web Management Software
This section explains the menu structure and the navigation buttons of the router’s Web Management software.
Menu Bar
IP Setup:
Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote
Configuration.
PPP:
Sets up the PPP authentication,
dial-on-demand, router authentication, and Wakeup on
Call.
Networks & Services:
Defines networks and services to make them available to other functions such as
allowed packet filters, static routes, remote configuration, DNAT, and GRE tunnels and
routes.
Packet Filters:
Defines filter rules, DNAT configuration, and ICMP rules.
GRE Tunnels:
Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel
through which traffic is to be routed.
DHCP Server:
Configures the DHCP server settings.
IPSec:
Allows device to support LAN-to-LAN VPN tunneling with 3DES and AES 128-192-256
encryption support
Tools:
Sets DDNS Force Update, displays DDNS Status, resets the modem, and provides
screens for Firmware Upgrade, Load Configuration, and Save Configuration.
Statistics & Logs:
Shows statistics and logs maintained by the router.
Save & Restart:
Saves your settings and reboots.
Help Index:
Accesses the online Help text.
Submit and Save & Restart
To save changes, click
Submit
on the bottom of most screens.
After saving changes, you need to restart for the changes to take effect. To restart, click
Save & Restart
on the
Menu bar. You can wait to restart until you finish changing settings on multiple pages.
Summary of Contents for MultiModem rCell MTCBA-H3-EN3-P1
Page 1: ...MultiModem rCell Intelligent Wireless Router User Guide ...
Page 14: ......
