Multitech MultiModem rCell MTCBA-H3-EN3-P1 User Manual Download

Page: 54 / 71

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem rCell User Guide

Tools

Tools > Tools

DDNS

DDNS Force Update:

Click Update to update the DDNS server with your current dynamically assigned IP
address.

DDNS Status:

Click Refresh to display the DDNS Status after a forced update.

Modem

Reset Modem:

Click Reset to reset the integrated cellular modem.

Tools > Firmware Upgrade

Firmware Upgrade

Use this page to update router firmware. Go to

multitech.com/support.go

to check for firmware updates.

Note:

Before you upgrade your firmware, save your present configuration. After upgrading firmware, verify
your configuration to ensure that it is as expected. Verify that the DHCP scope settings are correct.

Up to four IPSEC tunnels can be active at any given time. Additional tunnels can saved, but will not be
active.

Browse File for Upgrade:

Click

Browse

and locate the latest firmware version to be downloaded. Select the

mtcba-EN3-u-xxx.bin

file. Highlight the file name and press

Enter

so that the file name

Summary of Contents for MultiModem rCell MTCBA-H3-EN3-P1








































































Search results

Summary of Contents for MultiModem rCell MTCBA-H3-EN3-P1

Reviews:

Related manuals for MultiModem rCell MTCBA-H3-EN3-P1

Brands by name

Popular brands

Multitech MultiModem rCell MTCBA-H3-EN3-P1, User Manual

Search results

Summary of Contents for MultiModem rCell MTCBA-H3-EN3-P1

Reviews:

Related manuals for MultiModem rCell MTCBA-H3-EN3-P1

Brands by name

Popular brands