Chapter 3 – Using the Web Management Software
35
Multi-Tech Systems, Inc. MultiModem rCell User Guide
from LAN:
The default is disable. When enabled, the router will reconnect when it sees IP traffic
on the LAN that is needed to be routed. If this feature is disabled, Dial-on-Demand
initiates a PPP connection to the Internet only from the WAN, not from the LAN.
Init Strings:
Configure the router initialization string. This initialization string is specific to the
installed integrated cellular modem. Some initialization may be required for the
integrated cellular modem to accept the Wakeup-on-Call feature. Init-num can range
from 1-5. The default is NULL. Refer to the following table for examples of the Init String
depending on model.
Model
Init 1
Init 2
Init 3
Init 4
Ack
Comment
MTCBA-H3-EN3
AT+CNMI=
1,1,0,1,0
AT+CLIP=
1
AT+CNM
A
Ring, for any
number/call to trigger
Wakeup-on-Call.
Caller ID Configuration
Add “Wakeup on Call”
Caller ID:
To add Caller ID to the Wakeup-on-Call function, enter the Caller ID to be allowed to
wakeup the router. Enter ‘RING’ (all Caps) to wake up on any call.
Enter a CID phone
number or an SMS message. The SMS message string must not contain any spaces
between words.
After entering the Caller ID, click
Add
. The Caller ID displays at the bottom of the
screen. You can enter any number of IDs you desire.
A Caller ID can be edited or deleted using Options, which will be available once a Caller
ID is displayed.
Caller Acknowledgement Configuration
Acknowledgement String
to Caller:
The configured string of (0 to 40 characters) will be sent to the integrated cellular
modem upon receiving a valid caller ID from the WAN. The default is NULL string.
Note: If the string is not configured, acknowledgement to the caller will not be sent upon successful caller ID
reception.
Summary of Contents for MultiModem rCell MTCBA-H3-EN3-P1
Page 1: ...MultiModem rCell Intelligent Wireless Router User Guide ...
Page 14: ......
