Multitech MultiModem ISI ISI3334/4, Quick Start Manual

Page: 28 / 48

ISI3334-4/8 Quick Start Guide
28
SCO Open Server 5 Driver Installation
The ISI driver for SCO Open Server 5 is shipped on CD-ROM (FAT file system) and can also be downloaded from
the Multi-Tech web site. In both cases, the driver files are compressed (“tarred”). Users installing from the CD-
ROM should begin at “To install from CD-ROM” directly below. Users installing from a floppy disk should skip down
to “To install driver from floppy disk” later in this section. The filename of the SCO5 driver in its tarred form is
isisco.tar .
This present installation section is task-oriented with minimal explanation of procedural steps. The section Multi-
Tech Installation Script, which immediately follows this section, presents additional details to aid in installation.
To install from CD-ROM:
# mount -r /dev/cd0 /mnt
# cd /mnt
# cd servcard/drivers/sco50x
#cp isisco.tar /
# cd <ENTER>
To format a floppy disk for SCO5:
1. At the Unix prompt, run the scosh program.
2. Select Manager .
3. Select Archive .
4. Select Format .
5. Make sure that Device is pointed to the floppy drive.
6. Select
Continue .
To untar the driver file and copy files onto floppy disk:
1. Make a temporary directory for the ISI driver files..
# mkdir /isi
2. Copy the tarred isi driver file into the temporary directory.
# cp sco50x.tar /isi
3. Untar this file and put its contents into the temporary directory.
# cd /isi
# tar xf sco50x.tar
4. Copy the untarred (inflated or non-compressed) files to a floppy disk
# cd /isi/unifiedinstimg
#scosh
- Select
Manager .
- Select Archive .
- Select Create .
- Press space bar to highlight tmp/ and usr/ directories.
- Press <Enter> to copy.