Multitech MultiModem ISI ISI3334/4, Quick Start Manual

Page: 22 / 48

ISI3334-4/8 Quick Start Guide
22
14. Click on Set Configuration Manually .
15. Set the "Input/Output Range" to match the Base I/O Setting that you specified on the hardware DIP switch in Step 2
above. Set the "Interrupt Request" to match the IRQ setting you specified on the hardware jumper block in Step 2 above.
To alter these parameters, click on the Change Setting button.
16. When editing of IRQs and Base I/O Address settings is complete, click OK . Then click OK at the Resources screen.
The System Settings Change screen appears and prompts you to restart your computer. Click Yes .
17. When prompted about re-starting your computer, click Yes .
18. When the computer is restarted, the software installation will be complete.