Multi-Tech CallFinder Quick Start Server Installation
13
4. Resetting Admin PC to Its Regular IP Address
In step #1 above, you recorded the original IP address of the
administrator’s PC and then reset it to the IP address required to
allow communication with the CallFinder unit. You must now set the
IP address of the administrator’s PC to a value that allows you to
reach CallFinder at its new IP address.
5. Logging In (II)
Having reset the IP address of the administrator’s PC, you must log
into the CallFinder software again. Go to the
Login
screen, enter
admin
as User Name and
admin
as Password.
Note
: If you changed the IP address of your PC to
accommodate the CallFinder, a slight complication will
occur when you try to login to the CallFinder at this
point. At the
Login
screen, after entering your
username and password, you will be prompted to log
another user out. Select “Yes.” (Clicking
Yes
cancels
the logged-in status you had earlier when your PC was
at its previous IP address.)
