Server Installation Multi-Tech CallFinder Quick Start
12
2. Logging In (I)
a. Bring up a Web browser on your pc. At the browser’s address
line, type the CallFinder’s default IP address:
http://192.168.2.1
and press
Enter
.
b. The
Login
screen will appear.
At this point you can be assured that the CallFinder is
connected to the network.
If the
Login
screen does not appear, see item #1, “What if I
can’t see the web page for my CallFinder?” in the
Troubleshooting
section (page 23).
c. At the
Login
screen, enter
admin
(all lower case) in the User
Name field.
d. Enter
admin
(all lower case) in the Password field.
e. Click the
Login
button. The CallFinder software
Home
screen
will appear. From this screen, you can access all of the
CallFinder software screens.
3. Setting CallFinder IP Addresses
a. In the CallFinder
Administration
screen, go to the
IP
Configuration
fields.
Administration: IP Configuration
IP Address
192.168.4.89
Subnet Mask
Name Server
Default Gateway
Secondary
Name Server
update
255.255.255.0
192.168.11.251
192.168.4.1
b. Fill in the IP information that applies to your CF220 CallFinder
Server unit. The fields for “IP Address,” “Subnet Mask,” “Default
Gateway” and “Name Server” are required. A “Secondary
Name Server” may be considered optional.
c. Click
Update
. The CallFinder will adopt the new IP address 5
seconds after the Update command is invoked.
