![background image](http://html.mh-extra.com/html/multiquip/diamond-back-sp3-street-pro/diamond-back-sp3-street-pro_operation-and-parts-manual_1855306050.webp)
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE
49
MQ SP-3035 CONCRETE SAW
Fig. 35 — Spindle Replacement
7.
Remove the Spindle.
DO NOT unbolt the Spindle Mounting Blocks, as they have been factory-installed
for correct Spindle/wheel alignment.
8.
Fill the new Spindle with approved hydraulic oil and cap.
9.
Perform Steps 1-5 in reverse order.
Fig. 36 — Maintain equal spacing when tightening Saddle Clamps
Tighten Saddle Clamp bolts equally, maintaining even spacing as you reattach the
Saddle Clamps. Torque bolts to 35 ft. lbs. Do Not over-torque. Apply medium
strength thread lock, Blue Loctite 242 or equivalent.
Spindle Mounting
Block
DO NOT REMOVE
Saddle
Clamps
Lower Belt
Protector
Spacing
Spacing
Spindle Mounting
Block
DO NOT REMOVE
Summary of Contents for Diamond Back SP3 Street Pro
Page 2: ......