![background image](http://html.mh-extra.com/html/multiquip/diamond-back-sp3-street-pro/diamond-back-sp3-street-pro_operation-and-parts-manual_1855306048.webp)
MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE
47
MQ SP-3035 CONCRETE SAW
6.
Loosen the Mounting Bolt and remove the Outer Flange and Bushing.
7.
Inspect the Inner Flange to ensure the proper seating of the tapered fit.
The Inner Flange should be seated between .030” and 0.0” (flush) to the end of the Spindle.
Fig. 33 — Proper seating of the Inner Flange and Spindle
8.
Test to ensure that the Inner Flange does not wobble when rotated. Use a dial indicator on the
face of the Flange.
Maximum
tolerance is .003” run-out on the face of the Flange.
NOTE
For Spindle Maintenance/hydraulic oil change see page 58.
Summary of Contents for Diamond Back SP3 Street Pro
Page 2: ......