15
7.
Highlight the “Use the following IP Address” radio button and enter an IP Address in the range of the
currently assigned IP address of the Smart Tracker. Be sure not to enter an identical IP address in this textbox.
For example; if the Smart Tracker is assigned 192.168.100.1, the user may enter 192.168.100.2 in the textbox.
8.
Enter the appropriate subnet mask and gateway if it has not already been auto-filled. For example; if
192.168.100.2 is the IP Address, the Subnet mask would be 255.255.255.0.
9.
Assign the default gateway to 192.168.100.1.
10.
Select the “OK” button and then select “Close” on the previous window. The computer’s network interface
card may now begin communication with the Smart Tracker.
11.
Open a preferred web browser and enter the default IP address of the Smart Tracker in the address box. If the
user has assigned a different IP address, enter this IP address instead. The Summary Page should now be dis-
played.
Webpage Overview
:
Upon establishing connection to the embedded webpage of the Smart Tracker, the user is presented the Summary
Page. This page provides all operating parameters currently enabled for use and the state of each outlet, relay, and in-
put contact. Unit specific GPS coordinates are also included on this page. Coordinates display beneath the Google
map, when applicable. Additional configuration pages reside along the top of the webpage. These pages require user
authentication to access the Control, Configuration, and Event History pages for each Smart Tracker. In the following
sub-sections, each page and feature of the Smart Tracker will be shown and described.
