MULTICOM 4 PLUS, Installer Manual, Page: 3 / 29

4 5 Features Features
Features
Product Features
•
4 paths of communications - Dual Carrier
•
GPRS x 2
•
Contact ID via GSM x 2
•
Contact ID via PSTN
•
PFP (Poll fail protocol via GSM) x 2
•
3 Paths for programming options
•
TechTools App
•
PSTN (Attach standard hand set and
program via DTMF tones)
•
GPRS
•
PSTN Line failure detection based on
time and line voltage threshold (both
programmable)
•
PSTN switch over time programmable
(300mS default)
•
Power fault detection
•
Programmable alarm path priority.
•
4 Zone inputs (EOLR), each zone can be
disabled or enabled.
•
The alarm panel attached can be routed
either via MC4P as priority (GPRS Priority), or,
Direct to PSTN (If PSTN is available, the alarm
can communicate directly via PSTN).
•
Dedicated local tamper input
•
Fault reports for GSM, PSTN, GPRS, Power
Fault, Zones and Tamper. Each group of
alarm events can be mapped to either/or
Relay output and Contact ID
•
Programmable Test report time
•
Programmable Contact ID client code,
Primary monitoring station number and
RSWLRQDO3%;SUHÀ[IRU3671GLDOOLQJ
•
Programmable Relay outputs (Timed and
latched functions via SMS, GPRS)
•
Full RSU (Remote Software Update) via
GPRS.
•
ComWatch allows the Multicom to monitor,
detect and report failure to communicate
alarm messages via PSTN/GSM/GPRS even if
voltage is present Ref Option 5, 12 and 37.
Technical Features
•
Freescale 80Mips 32 bit processor
•
Multithreaded Real Time Operating system
for seamless real time path recovery and
system resource management
•
Telit GE864 Quad band GPRS modem
•
2 RJ12 connections for phone line in / out
with Mode 3 and Isolation relays built in
•
All alarm communication paths have priority
assignment for alarm event communication