MULTICOM 4 PLUS, Installer Manual, Page: 17 / 29

33 Programming Options 32 Programming Options
Secondary CMS Number / Default: Blank
DTMF * 3 7 1 3 4 5 X X X X #
Program this to the same backup phone number
in the attached panel. This is only used to allow
ComWatch to detect if the panel is attempting to
dial the backup number, the Multicom will not dial
this number.
ComWatch Mode Count / Default: 3
DTMF * 0 5 3 #
How many attempts the attached panel has to
correctly deliver a Contact ID message to the
monitoring station before the Multicom takes
priority. Program to 0 to disable.
E.g the panel
dials 3 times and no handshake or kiss off tones are
heard, the Multicom will take control of the alarm
delivery path.
ComWatch Mode Bypass Time / Default: 24
DTMF * 1 2 2 4 #
This is the time in hours that the Multicom will hold
priority after ComWatch detects that alarms could
not be delivered via PSTN/GSM.
Programming Options
Account Code / Default: Auto detect
DTMF * 0 1 9 9 9 8 #
Contact ID account code used by the 4 Plus
Note: Panels that report multiple account codes
may be changed from the code that was initially
taken from the alarm panel. This option can be
changed during the commissioning procedure
with the Suretek Activations Centre.
Primary CMS Number / Default: Blank
DTMF * 0 2 1 3 4 5 X X X X #
Central Monitoring Station Phone number for when
the Multicom communicates via GSM or PSTN (Max
19 digits)
eg. 13451111 or 1300111222
3%;3UHÀ[ / Default: Blank
DTMF * 1 9 X X X X X #
Optional number for getting an external line out
via PSTN (not GSM) (Max digits is 5)